support@eleronlights.com

This post is also available in other languages:

Content Reuse Policy

You may reproduce or adapt this content for educational or commercial use with proper attribution and a link to: the original blog post Include a visible credit near the reused content with a standard hyperlink to the source.

VLAND BMW 3 Series F30/F80 Taillights — CSL, GTS OLED & LCI Look (E-Mark, Retrofit, Sequential)

Eleron TeamOctober 13, 20255 min read69 views

Compare VLAND taillights for BMW F30/F80 sedans: CSL style, GTS OLED with startup animation, and LCI look — all E-mark. Fitment for Pre-LCI & LCI, plug-and-play wiring, sequential amber turns, tips for bulb-check messages, plus links to E-mark, aiming and CANBUS guides.

Related Products

BMW 3 Series Tail lights EU GTS Style 2012-2019 | VLAND EU
BMW 3 Series Tail lights EU GTS Style 2012-2019 | VLAND EU

SKU: YAB-BW-0293A-RC1YC

€298.99In Stock
BMW 3 Series Tail lights EU CSL Style 2012-2019 | VLAND EU
BMW 3 Series Tail lights EU CSL Style 2012-2019 | VLAND EU

SKU: YAB-BW3-0293B-RC1YC

€477.99In Stock
BMW 3 Series Tail lights EU 2012-2018 | VLAND EU
BMW 3 Series Tail lights EU 2012-2018 | VLAND EU

SKU: YAB-BW-0293-CB1YC

€330.99In Stock

Related Vehicles

BMW 3 Series
VLAND EU • BMW F30/F80 Tail Light Guide
Three EU-focused options for the F30/F80 sedan: CSL style, GTS OLED, and LCI look — all E-mark certified.

Quick Chooser — Which VLAND F30/F80 Taillights?

CSL Style (LED)

  • 3D linear signature + smooth start/breath effect
  • Amber sequential turns (enable via rear connector toggle)
  • Plug-and-play, E-mark

GTS Style (OLED)

  • Uniform OLED glow + animated startup
  • Amber sequential indicators
  • Plug-and-play, E-mark

LCI Look (LED)

  • Clean fiber-optic styling
  • Amber sequential turns
  • Plug-and-play, E-mark

Fitment: F30 3-Series sedan (2012–2019) & F80 M3 (2014–2018), both Pre-LCI & LCI. Not for F31 Touring or F34 GT (see Touring note below).

VLAND GTS Style OLED — Animated Start & Sequential

  • Signature: OLED panels for a premium, uniform red glow with startup animation.
  • Functions: Running = red OLED; Brake = red LED; Reverse = white LED; Turn = amber sequential.
  • Fitment: BMW F30 sedan 2012–2019 & F80 M3 2014–2018 (Pre-LCI & LCI).
  • Install: Plug OE multi-pin plugs; mount at factory points.
  • Compliance: E-mark (ECE); IATF 16949 & ISO 9001 production; 12-month warranty from delivery.
  • Finishes: Smoked or Red Clear.
GTS OLED: uniform depth, animated start, amber sequential turns.

VLAND CSL Style — 3D Light Guide with Sequential Option

  • Signature: Modern CSL “laser-look” with 3D running light and smooth welcome animation.
  • Functions: All-LED: running/brake (red), reverse (bright white), turn (amber). Sequential indicators are shipped disabled; enable by unplugging the small white/brown connector on the rear of each lamp.
  • Fitment: BMW F30 sedan 2012–2019 & F80 M3 2014–2018 (Pre-LCI & LCI).
  • Install: Plug-and-play; transfer any clips/gaskets as needed; verify panel gaps.
  • Compliance: E-mark (ECE); 12-month warranty from delivery.
  • Finishes: Smoked or Red-Clear.
CSL: 3D signature with optional sequential amber turns.

VLAND LCI Look — Clean Fiber-Optic Styling

  • Signature: LCI-inspired fiber-optic guides and crisp LED illumination.
  • Functions: Running/brake (red), reverse (white), rear fog (red), turn (amber sequential).
  • Fitment: BMW F30 sedan 2012–2018 & F80 M3 2014–2018 (Pre-LCI & LCI).
  • Install: OE connectors; no bulbs or resistors required.
  • Compliance: E-mark (ECE); IATF 16949 & ISO 9001 production systems.
  • Finishes: Red or Smoked.
LCI look: clean fiber-optic guides with amber sequential turns.

E-Mark & EU Legality — Straightforward

All VLAND F30/F80 taillight styles above are E-mark (ECE) certified. You’ll find the E-mark on the housing. For best results with inspections, install carefully, check panel gaps and seals, and use as intended for your tuning project and local expectations. For a deeper dive into markings, see our E-mark guide.

The circled “E” and code on the lens/housing indicate UNECE type-approval.

Install & Troubleshooting Tips

Plug-and-Play Install (all styles)

  1. Remove OE lamps; transfer clips/grommets if needed.
  2. Connect the OE multi-pin plugs and mount securely at factory points.
  3. Function check: running, brake, reverse, rear fog (if equipped), and turn (sequential where applicable).
  4. Adjust panel gaps; finalize reassembly.

No coding is typically required on stock vehicles. If a bulb-check appears, an inline decoder usually resolves it. See CANBUS & LED errors.

Best Practices

  • Protect seals/vents from pressure washers; seat foam gaskets evenly.
  • If you enable CSL sequential: unplug the small white/brown connector on each lamp and retest hazards/turns.
  • Brief misting can occur with temperature swings; it should clear with operation. Persistent pooling? Contact support.
  • Need aiming tips for the front headlights? Use our headlight aiming guide.

Also Available: F31 LCI (Touring) Taillights

Running a Touring (F31)? We also carry F31 LCI taillight options. Browse the BMW 3-Series taillight catalog to see all sedan and Touring variants available.

Useful Resources

Ready to choose your style?

Compare finishes and availability for CSL, GTS OLED and LCI look in our dedicated BMW 3-Series taillight catalog.

© VLAND EU — Genuine VLAND products with local support. More articles.

Related Posts