Full LED Tail Lights — VW Golf Mk7 & Mk7.5 Variant / Estate
Dynamic Sequential Turn Signals & Startup Animation — Complete 4-Piece Set — Variant · Estate · Sportwagen · Alltrack — 2013–2020
VW Golf Mk7 & Mk7.5 • Variant • Estate • Sportwagen • Alltrack • GTD • R • 2013–2020 • EU & UK
The estate is the Golf people actually live with — and the one the aftermarket usually forgets. Most LED tail light sets are made for the hatch and stop there. These are built specifically for the Variant body: full LED throughout, a dynamic sweeping turn signal, and a startup animation on lock and unlock. The modern rear-light signature the wagon rarely gets offered.
Supplied as the complete set — both outer (body) and inner (tailgate) units, left and right. Connectors match the factory tail light plugs for a like-for-like swap, fully plug-and-play with zero coding.
Designed for the Golf Variant / Estate / Sportwagen (and Alltrack), EU and UK market. Not for the hatchback — see our hatch-specific sets for that body.
Step 1 — Mk7 or Mk7.5?
The Mk7 and Mk7.5 Variant use different tail light housings and connectors. We manufacture a dedicated version for each — select the generation that matches your car.
Mk7
2013–2016
Pre-facelift Golf Variant. This is the full-LED conversion — the biggest visual upgrade for the rear.
Mk7.5
2017–2020
Facelift Golf Variant. Full-LED signature with the dynamic sweep, matched to the facelift housing.
Not sure which you have? The quickest tell is the year (facelift from 2017). If in doubt, send us your VIN and we'll confirm the generation and the correct version.
Want to confirm generation and body fitment first?
Send us your VIN and we'll check in minutes. Contact us here →
Engineered to Stay on the Car
Mk7 & Mk7.5 — Zero Coding
A dedicated version for each generation, both fully plug-and-play. The connectors match the factory tail light plugs and the electronics communicate with your car directly — no retrofit harness, no coding, no error codes. Plug in, test, drive.
Built for the Variant Body
Made specifically for the Golf estate's longer body and its four-piece tail light layout — not a hatchback set adapted to fit. The outer body units and inner tailgate units match the Variant's exact geometry.
Dynamic Sequential Turn Signals
The indicators animate in sequence, sweeping outward across the light instead of blinking as a single block — the dynamic turn signal everyone wants, built in.
Startup Animation
A choreographed light sequence plays when you lock or unlock the car — a moving welcome effect the factory tail lights never offered.
Complete 4-Piece Set
Both the outer body-mounted units and the inner tailgate units are included — left and right, four pieces total. A full replacement of every tail light on the car, not a partial upgrade.
Sealed Construction & 2-Year Warranty
ABS housings with sealed lens construction, resistant to moisture and condensation. Each set is bench-tested before shipping and backed by two years of coverage from delivery.
Installation
A like-for-like tail light swap through the tailgate and rear interior. No bumper removal, no coding. Allow 45–60 minutes for the full set.
- Open the tailgate and remove the rear interior trim panels to access the tail light mounting hardware.
- Unbolt the outer (body) tail lights and disconnect the factory plugs.
- Unbolt the inner (tailgate) tail lights and disconnect.
- Plug the new outer and inner units into the factory tail light connectors and mount.
- Test before reassembly — trigger the lock/unlock animation, then verify running lights, brake lights, reverse light, fog light, and sequential indicators.
- Reinstall the trim panels.
Frequently Asked Questions
Yes. These are made specifically for the Golf Mk7 and Mk7.5 estate body — known as the Variant, Estate, or Sportwagen depending on market. Just select the generation that matches your car.
Yes. The Alltrack shares the Variant's tail light mounting and connectors, so this set fits it as well.
The housing shape and connectors. The pre-facelift Mk7 (2013–2016) and facelift Mk7.5 (2017–2020) have different tail light geometry, so we make a dedicated version for each. Both carry full LED, sequential indicators, and the startup animation.
No. The estate and hatchback use completely different tail lights. This set is for the Variant/estate body only — we offer separate sets designed for the hatchback.
No. Both the Mk7 and Mk7.5 versions are fully plug-and-play. The sequential indicators and startup animation work out of the box with no retrofit harness and no coding.
The complete set — both outer (body) and inner (tailgate) units, left and right. Four pieces total.
No. These are designed for EU and UK market vehicles and are not intended for US-spec cars.
Yes. It's a like-for-like swap through the tailgate and rear interior with basic hand tools — no bumper removal, no lift. Around 45–60 minutes for the full set.
Technical Specifications
| Light Source | Full LED |
|---|---|
| Body Style | Variant / Estate / Sportwagen (incl. Alltrack) |
| Turn Signals | Dynamic sequential sweeping (amber) |
| Startup Animation | Lock/unlock light sequence |
| Housing Material | ABS + PMMA Lens |
| Coding | None required (Mk7 or Mk7.5) |
| Market | EU & UK (not for US-spec vehicles) |
| Compatibility | VW Golf Mk7 (2013–2016) & Mk7.5 (2017–2020) · Variant/Estate body only · not hatchback |
| Sold As | Complete set — 2× outer (body) + 2× inner (tailgate) |
| Warranty | 2 Years |
OEM Cross-Reference Numbers
| Inner (Tailgate) Standard · 2013–2020 | 5G9945093 · 5G9945093D · 5G9945093E · 5G9945094 · 5G9945094D · 5G9945094A · 5G9945094E |
|---|---|
| Inner (Tailgate) Tinted · 2013–2020 | 5G9945093F · 5G9945093C · 5G9945093G · 5G9945094F · 5G9945094C · 5G9945094G |
| Outer (Body) Standard · 2013–2020 | 5G9945095H · 5G9945096H |
| Outer (Body) Tinted · 2013–2020 | 5G9945095J · 5G9945096J |
This list covers the most common EU/UK OEM references for the Golf Variant/estate. Production-date, trim, and supplier revision suffixes vary — if your part number isn't shown, send us your VIN and we'll confirm compatibility.