GTS-Style LED Tail Lights — BMW 1 Series (F20/F21) LCI
3D Layered Design with Sequential Amber Indicators & Startup Animation — EU & US Fitment — LCI 2015–2019
BMW F20 5-Door • F21 3-Door • All Engine Variants • LCI • 2015–2019 • EU & US Market
The factory LCI tail lights work. They're fine. But the flat, single-plane LED strips were always the part of the rear end that looked like cost engineering rather than design intent. These GTS-style units replace them with a layered, three-dimensional light architecture — intersecting LED filaments visible through the lens at depth, the way BMW builds tail lights on its flagship and motorsport-derived models.
Sequential amber turn signals sweep across the full width of each light when signaling. A startup animation plays when you unlock the car. Both the outer (fender) and inner (trunk lid) units are included — the full set, not a partial upgrade. Plug-and-play on both EU and US market vehicles — select your market at checkout — with zero coding.
E-Marked (ECE) — road-legal. Amber sequential indicators are compliant in both EU and US markets.
Step 1 — Select Your Market
BMW uses different tail light wiring harnesses for EU and US market vehicles. Select the market your car was originally built for — not where it's currently registered.
EU Market
Your car was manufactured and originally sold for the European market.
US Market
Your car was originally built for the US market — even if it's now registered in Europe.
Not sure? Send us your VIN and we'll confirm.
Step 2 — Choose Your Housing
Three finishes. Same internal architecture, same sequential indicators, same startup animation. The difference is purely aesthetic.
Red
Factory-correct presence.
Classic red housing that blends with the car's existing lines during the day. The 3D filament architecture reveals itself at night.
Smoked
Darkened with depth.
Semi-transparent smoked lens that reveals the internal LED architecture even when off. When lit, the red filaments cut through the dark housing with sharp contrast.
Smoked Red
The middle ground.
Smoked housing with red-tinted internal elements. Darker than factory, warmer than full smoked. The filaments glow with a deeper red tone.
Questions about fitment or housing choice?
Send us your VIN and we'll help. Contact us here →
Engineered to Stay on the Car
EU & US Market — Zero Coding
We manufacture dedicated versions for both European and US market F20/F21 LCI vehicles — select your market at checkout based on where your car was originally built. Both versions are plug-and-play with zero coding. If you're running a US-spec car in Europe and want proper amber sequential indicators, these are a direct solution.
Sequential Amber Indicators
Amber sweeps smoothly across the full width of each tail light when signaling — replacing the factory's static or red-lens indicators with a dynamic, European-spec amber pattern. Compliant in both EU and US markets.
3D Layered Light Architecture
Intersecting LED filaments are arranged at multiple depths within the housing — visible through the lens as a three-dimensional structure. This is the same layered design language BMW uses on its GTS and motorsport-derived models.
Complete Set — Outer & Inner
Both the outer fender-mounted units and the inner trunk lid units are included. This is the full replacement — no mismatched lights, no partial upgrade.
E-Marked (ECE)
Every unit carries ECE certification. Road-legal for TÜV, MOT, EU periodic inspections, and US state inspections.
2-Year Warranty
ABS housings with sealed construction, bench-tested before shipping. Two years of coverage from delivery date.
Startup Animation
When you unlock the car, a sweeping LED sequence plays through the 3D filaments — a welcome effect built into the tail light's own logic board. No extra modules, no wiring. During normal operation, the tail lights function as standard brake, running, and indicator lights.
Installation
A straightforward tail light swap. No bumper removal, no wiring modifications, no coding. Allow 30–45 minutes.
- Open the trunk and remove the inner trim panels to access the tail light hardware.
- Unbolt the outer (fender) tail lights and disconnect the harness plugs.
- Unbolt the inner (trunk lid) tail lights and disconnect.
- Plug the new GTS-style units into your factory harness and mount.
- Test before reassembly — trigger the unlock sequence, then verify brake lights, running lights, reverse lights, and sequential indicators.
- Reinstall the trunk trim panels.
Frequently Asked Questions
Yes. The F20 (5-door) and F21 (3-door) share identical tail light mounting points and connectors.
Select US Market. The wiring harness matches your car's original build market, not where it's currently registered. The sequential amber indicators will work correctly on both EU and US harnesses.
Yes. All three housing options — Red, Smoked, and Smoked Red — carry E-Mark (ECE) certification. The smoked treatment does not reduce the light output below the legally required threshold.
Yes. You receive both the outer fender-mounted units and the inner trunk lid units — the complete set, left and right. Four pieces total.
No. Both the EU and US versions are fully plug-and-play. Just select the correct market at checkout and the internal electronics handle the rest.
The animation is built into the tail light's own logic board. It triggers automatically when you unlock the car with the key fob. No extra modules or wiring required.
No. This tail light is designed for LCI (2015–2019) cars only. The Pre-LCI uses a different housing shape and mounting.
Yes. Tail light replacement on the F20 requires only basic hand tools and access to the trunk interior. No bumper removal, no lift. About 30–45 minutes.
Technical Specifications
| Light Source | Full LED — 3D layered filament architecture |
|---|---|
| Turn Signals | Sequential sweeping (amber) |
| Startup Animation | Included (built into logic board) |
| Housing Options | Red · Smoked · Smoked Red |
| Housing Material | ABS + PMMA Lens |
| Certification | E-Mark (ECE) |
| Market Compatibility | EU & US (select at checkout — dedicated version for each harness) |
| Compatibility | F20 (5-door) · F21 (3-door) · LCI · 2015–2019 |
| Sold As | Full set — 2× outer (fender) + 2× inner (trunk lid) |
| Warranty | 2 Years |
OEM Cross-Reference Numbers
| Standard (Side Panel) LCI · 2015–2019 |
L: 63217359017 R: 63217359018 |
|---|---|
| Standard (Trunk Lid) LCI · 2015–2019 |
L: 63217359019 R: 63217359020 |
| Black Line (Side Panel) LCI · 2015–2019 |
L: 63217456501 R: 63217456502 |
| Black Line (Trunk Lid) LCI · 2015–2019 |
L: 63217456503 R: 63217456504 |
This list covers the most common EU OEM references for both Standard and Black Line tail lights. Some market-specific part numbers may not be listed. If your part number isn't shown, send us your VIN and we'll confirm compatibility.
